New tyres for Bedford drivers

Every bit of braking, steering and grip goes through four tyre contact patches roughly the size of your hand. Fitted, balanced and disposed of properly, ten miles from Bedford. Our workshop is on Tyne Road in Sandy, about 25 minutes from Bedford by the A603.

  • Certified by the AAAA ApprovedRepair garage
  • Good Garage Scheme memberGood Garage SchemeCode of conduct
  • NBRAAccredited body repairer
  • TrustpilotRead our reviews
  • Checkatrade verified memberCheckatradeVerified member

What you are actually paying for

Premium

The shortest wet braking distances and the longest life. Worth it on a car doing real mileage, and the cost per mile is often lower than the ticket price suggests.

Mid-range

The sensible middle for most drivers, without the premium price. Ring us and we will tell you what we can get for your size.

Budget

A legal, road-legal tyre that meets the standards, and a reasonable choice on a low-mileage car. We will say so if we think it is the wrong call for how you drive.

The specifics

Price
Quoted by size

Tell us the sidewall size and we will price all three tiers.

Legal tread limit
1.6mm

Most drivers change at around 3mm.

Included
Removal, fitting, valve

Electronic balancing and responsible disposal included.

Distance from Bedford
About 10 miles

Roughly 25 minutes by the A603.

The legal minimum tread depth is 1.6mm across the central three quarters of the tread, right around the tyre. Wet-weather grip falls away well before that, so we suggest replacing at 3mm. To check it yourself, put a 20p coin into the main tread grooves. If you can see the outer band of the coin, the tyre is getting close to the limit and it is worth having it measured properly.

What we check with the wheels off

  • Tread depth across the full width, not just the middle

  • Uneven wear that points at alignment or suspension

  • Cuts, cracks and kerb damage in the sidewall

  • Bulges, lumps and exposed cords

  • Valve condition and pressure sensor function

  • Brake pad and disc condition, now they are visible

  • Spare or space-saver condition and pressure

  • Tyres over ten years old, which should be replaced even if the tread looks legal

New tyres on a misaligned car wear out twice

If one edge of your old tyres is worn away and the other looks nearly new, the geometry is out, usually because of a kerb, a pothole or worn suspension bushes. Fitting a fresh set without correcting it means paying for the same set twice. We will show you the wear pattern on the old tyre so you can see it for yourself.

What happens next

  1. 1. Tell us the size

    It is moulded into the sidewall, something like 205/55 R16 91V. Ring it through or bring the car in and we will read it off.

  2. 2. We price the options

    Premium, mid-range and budget in your size, with the differences explained rather than just the numbers.

  3. 3. Fitted and balanced

    New valve, balanced on the machine, torqued to the manufacturer's figure, old tyres taken away.

  4. 4. Alignment if it needs it

    If the old tyres wore unevenly, something is out. Fitting new ones without correcting it wears them out the same way.

Contact us to arrange it

Questions we get asked

Need tyres in Bedford? Give us the size

Three tiers priced for your car, fitted and balanced, with the old ones taken away.